Does this cover wells too?

Yes. Wells use the same submersible or ultrasonic level sensors, with discharge measured through any pulse-output flow meter, so well data lands in the same dashboard as your tanks and ponds.

Will I find out before a tank runs dry, or only after?

Before. You can set high and low-level alerts on every tank, so you're notified while there's still time to act — to schedule a delivery truck, adjust a pump, or investigate a leak — instead of finding out only after it's already empty or overflowing.

Tank & Pond Monitoring

Every tank and pond,
watched in real time

Q: Pressure or ultrasonic — which sensor do I need?

Both are supported, and the right choice depends on the installation. Submersible pressure transducers sit in the liquid and measure depth directly — available from 0–250 PSI up to 0–500 PSI, with deep well sensors reaching custom depths to 690 ft. Ultrasonic and bubbler sensors measure level without contacting the liquid, which can be a better fit for fuel, fertilizer, or hard-to-access wells. Your reseller can help match the sensor to your tank or well.

Q: Does this work for fuel and fertilizer tanks, or just water?

All three. The same level-monitoring infrastructure tracks fuel and liquid fertilizer storage alongside water — alerts when those tanks run low help prevent equipment downtime and missed fertigation windows, and consumption logs tie into operational cost reporting.

Q: Can it monitor a pond or reservoir, not just a tank?

Yes. Ponds, lined reservoirs, and canals use the same sensor suite as tanks, with volume calculations that account for non-linear geometry — useful for tracking seepage rates and seasonal carry-over storage.

Q: Can a level reading trigger something automatically, like a shutoff valve or alarm?

Yes. Alerts aren't limited to a notification — a level reading can trigger a shutoff valve or alarm horn automatically, so an overfill or a dangerously low tank gets an immediate physical response.

Monitor the level of tanks, ponds, wells, and other liquid storage — including fuel and fertilizer — using submersible pressure or ultrasonic sensors, with volume calculated automatically from tank geometry.

Schedule a Consultation How It Works

Real-time level, calculated to gallons

Submersible pressure or ultrasonic sensors report tank level continuously, and the software calculates volume from tank geometry automatically — no manual dipping, no guesswork.

Features

Submersible pressure & ultrasonic level sensors
Real-time level and current gallons per tank
One-click graphs of level or volume over time
Alerts on out-of-range conditions; PDF reports

Benefits

Reduce risk and cost of outages
Improve delivery-truck scheduling
Prevent overfills and overflows
Track water usage

Water tanks with a solar-powered Ranch Systems monitoring node

Works with the sensors you need

Ranch Systems telemetry reads a wide range of tank and well level sensors — submersible pressure transducers from 0–250 PSI up to 0–500 PSI, submersible level sensors with 50 ft or 100 ft cables, deep well sensors to custom depths of 690 ft, and well bubbler sensors — so there's a sensor that fits your storage depth and type.

See the full compatible sensor list →

Common Questions

Tank & pond monitoring, answered

Pressure or ultrasonic — which sensor do I need?

Does this work for fuel and fertilizer tanks, or just water?

Can it monitor a pond or reservoir, not just a tank?

Can a level reading trigger something automatically, like a shutoff valve or alarm?

Ready to see every tank and pond, in real time?

Schedule a Consultation

Real-time level, calculated to gallons

Features

Benefits

Works with the sensors you need

Tank & pond monitoring, answered

Ready to see every tank and pond, in real time?

Built to work together

Agriculture

Water Management

Irrigation Valve Control

Rainwater Catchment Solutions

Compatible Sensors & Devices